Help Centre
Filled cones, paste pouches, applicators and tip sizes
Questions in this topic
How do I hold a cone correctly?
Hold it like a small piping bag, with the tip pointing down and the paste pushed towards the front. Rest the cone between your fingers and use the other fingers to guide… Read answerWhere should my fingers apply pressure?
Apply gentle pressure to the filled body of the cone just behind the paste, gradually moving from the sealed back towards the tip as it empties. Avoid squeezing the seam, the very… Read answerHow hard should I squeeze?
Use only enough pressure to create a steady line. If you need to squeeze hard, stop and check whether the paste is still cold, the tip is blocked or the consistency is… Read answerHow close should the tip be to the skin?
For many lines, hold the tip just above the skin and let the paste fall into place as you move. Touching lightly can help with a starting point or dot, but dragging… Read answerHow do I make a continuous line?
Start with a tiny bead, lift the tip slightly, then move at a steady pace while maintaining even pressure. Watch the paste line rather than the tip itself. If it breaks, pause,… Read answerHow do I make fine lines, dots, leaves and filled areas?
Use lighter pressure and steady movement for fine lines. For a dot, hold still and squeeze briefly; for a leaf, begin with pressure and taper as you pull away. Build filled areas… Read answerHow do I reseal a partly used cone?
Wipe the tip clean, replace a clean pin or cap if the product provides one, and fold or secure the back so air cannot enter and paste cannot escape. Put the cone… Read answerWhy are air bubbles interrupting the line?
Air can be trapped during filling or introduced when paste settles away from the tip. Keep the cone tip-down, gently work the paste forward and squeeze test lines on paper until the… Read answerShould I use a hand-rolled cone or an applicator bottle?
Choose the tool you can control comfortably. A hand-rolled cone is light, disposable and familiar for fine mehndi; a bottle is reusable, can use interchangeable tips and may feel easier to refill,… Read answerWhat do bottle-tip gauge numbers mean?
Gauge describes the tip or needle size; in common gauge systems, a higher number generally means a narrower opening. However, brands and tip shapes can behave differently, and gauge is not a… Read answerCan metal or plastic applicator tips be changed and reused?
Only if the applicator is designed for removable, reusable tips. Match the thread or fitting, inspect for damage and make sure the tip is fully clean and dry before filling. Never force… Read answerPersonal support
Still need help?
Get an instant answer from the assistant, or speak with our team for personal help.