Help Centre
Cones, Mixing and Recipe Ingredients
Questions in this topic
How long should this powder rest for dye release?
Use the time and temperature guide supplied with our exact powder. Dye release can vary with the liquid, room temperature, batch and container, so a generic number may produce weak paste. Read answerHow does temperature change dye-release time?
Warmer conditions generally speed the chemical process, while cooler rooms slow it, but excessive heat can shorten the useful working window or weaken paste. Record the mixture temperature and follow the product's… Read answerHow does humidity change the recipe or resting time?
Humidity mainly changes how much liquid and sugar the paste appears to need and how it dries on skin; temperature is usually the stronger influence on dye-release speed. In humid weather, add… Read answerHow can I test whether dye release is complete?
Follow the readiness check supplied with the powder. Common checks combine the expected resting window with a small paste or stain test, but appearance alone can be misleading. Record the time and… Read answerCan paste release too much dye or sit too long?
Yes. Once mixed, henna has a limited period in which dye is available at useful strength. Leaving it warm for too long can move past peak performance even if the paste still… Read answerWhat consistency should finished paste have?
For cones, paste should be smooth, cohesive and able to form a continuous raised line without requiring force or spreading flat. It is often compared with a thick, silky piping consistency, but… Read answerWhy is my paste too thick?
The powder may need slightly more recipe liquid, may not have fully absorbed it, or may be too coarse for the tip. Let the mixture rest as instructed, then add tiny measured… Read answerWhy is my paste too thin or runny?
Too much liquid, too little absorption time, excessive sugar or recipe measurement error can make paste spread. First let it rest and recheck because powder continues to hydrate. If the approved recipe… Read answerWhy is it sticky, stringy, grainy or lumpy?
Some stringiness is useful for flowing lines, while excessive stickiness may come from sugar or climate. Graininess and lumps can result from incomplete mixing, poor hydration or unsuitable material. Mix thoroughly, allow… Read answerDo I need to sift the powder?
Our Sojat Natural Henna Powder's preparation is: Five times sifted. Additional dry sifting may not be necessary for normal use, but careful mixing still matters. Keep the powder clean and follow your tested recipe. If a very fine tip repeatedly… Read answerCan a failed or weak batch be rescued?
Texture can sometimes be adjusted within the approved recipe, but dye strength lost through wrong ingredients, excessive heat or too much time cannot reliably be restored. Record what happened and run a… Read answerPersonal support
Still need help?
Get an instant answer from the assistant, or speak with our team for personal help.