Help Centre
Powder quality, mixing and dye release
Questions in this topic
How can I test whether dye release is complete?
Follow the readiness check supplied with the powder. Common checks combine the expected resting window with a small paste or stain test, but appearance alone can be misleading. Record the time and… Read answerCan paste release too much dye or sit too long?
Yes. Once mixed, henna has a limited period in which dye is available at useful strength. Leaving it warm for too long can move past peak performance even if the paste still… Read answerWhat consistency should finished paste have?
For cones, paste should be smooth, cohesive and able to form a continuous raised line without requiring force or spreading flat. It is often compared with a thick, silky piping consistency, but… Read answerWhy is my paste too thick?
The powder may need slightly more recipe liquid, may not have fully absorbed it, or may be too coarse for the tip. Let the mixture rest as instructed, then add tiny measured… Read answerWhy is my paste too thin or runny?
Too much liquid, too little absorption time, excessive sugar or recipe measurement error can make paste spread. First let it rest and recheck because powder continues to hydrate. If the approved recipe… Read answerWhy is it sticky, stringy, grainy or lumpy?
Some stringiness is useful for flowing lines, while excessive stickiness may come from sugar or climate. Graininess and lumps can result from incomplete mixing, poor hydration or unsuitable material. Mix thoroughly, allow… Read answerDo I need to sift the powder?
Our Sojat Natural Henna Powder's preparation is: Five times sifted. Additional dry sifting may not be necessary for normal use, but careful mixing still matters. Keep the powder clean and follow your tested recipe. If a very fine tip repeatedly… Read answerCan I scale the recipe down to make only one cone?
Yes, if every ingredient can still be measured accurately and the approved ratio is maintained. Use a precise scale and write down the calculation; very small essential-oil quantities are easy to mismeasure.… Read answerDo I need to strain the finished paste?
Straining can remove fine fibres or lumps that block precision tips, even when powder is well sifted. Whether it is required should be stated in the exact recipe. Use a clean method… Read answerHow do I remove lumps and air bubbles?
Mix and press the paste thoroughly, allow the powder to hydrate, then strain if the product instructions recommend it. Transfer it slowly in one compact mass and tap or massage the filled… Read answerHow do I fill cones without making a mess?
If you need help with our Carrot Bag For Henna Paste, tell us which filling bag and cones you have. We can help confirm the filling method before you start. Avoid trapping air, close each cone securely and test its… Read answerPersonal support
Still need help?
Get an instant answer from the assistant, or speak with our team for personal help.