Help Centre
Storage, Troubleshooting and Safety
Questions in this topic
Why is the paste spreading after application?
The paste may be too warm or thin, the opening may be larger than expected, or the skin may have moisture, lotion or oil on it. Let a purchased cone settle at… Read answerWhy is paste leaking from the back or seam?
The closure may have loosened, the wrapper may be split, or pressure from squeezing or warming may have opened the seam. Stop applying it to skin, place it on a clean disposable… Read answerWhy is liquid or oil separating from the paste?
Paste ingredients can redistribute during freezing, thawing and transport, so a little separation may occur without identifying a fault. Keep the package closed, gently work the contents together and test its consistency… Read answerWhy is the paste curling as it exits the cone?
Curling usually means the paste is catching at the tip, the opening is uneven, or the cone is being held too far from the surface. Test the flow, wipe the outside of… Read answerWhy are air bubbles causing gaps and blobs?
Air can become trapped during filling or as paste is pushed unevenly towards the tip. With the cone closed, massage it gently from the broad end towards the tip, then expel a… Read answerWhy does paste crack and fall off too early?
Thin lines, movement, cold or very dry air can make paste lose flexibility and flake before you intend it to. Let the design become touch-dry without bending the area, then use only… Read answerWhy is it taking too long to dry?
Thick application, high humidity, cool conditions or paste that is too wet can lengthen drying time. Our Fresh Natural Henna Paste usually takes about 20 minutes to dry, but this is a… Read answerWhy did tape or wrapping smudge the design?
The paste was probably not fully touch-dry, the covering pressed against raised lines, or trapped warmth and moisture softened it again. Do not tape tightly over wet paste. Let the exact product… Read answerWill a postal delay or hot weather damage the paste?
It can reduce fresh paste’s useful dye strength because time and heat continue affecting released dye, but the result depends on the product, duration and actual conditions. A delay does not prove… Read answerWhy did the design transfer to another finger or surface?
Transfer happens when wet or softened paste touches nearby skin, clothing, bedding or furniture. Keep fingers and joints separated while the design dries, avoid resting the area against a surface and do… Read answerHow is fresh paste protected during shipping?
We send our Fresh Natural Henna Paste on working days using next-day delivery, but we have not published details about insulation, ice packs, temperature monitoring or a guaranteed cold chain. Check the… Read answerPersonal support
Still need help?
Get an instant answer from the assistant, or speak with our team for personal help.